
PowerMate Model M-1
- 全自动制动系统
- 超控离合器
- 驱动螺杆顶盖
- 坚固的钢制外框负载货物
- 机器体积为 27" 宽 x 17" 深 x 60" 高
- 机器重量为 165 磅
- 重型控制开关
- Two Adjustable Strapbars 26" Length
- 杆和板垫毡 —— 保护货物
- 重型 10 英尺强化杆长度
- 快速释放安全锁定凸轮
- 超高效驱动螺杆
- .65 千瓦高效率直流马达
- Retractable 2-Wheel Dolly
- 杠杆
- 免维护并可充电 12V 28AMP 密封式电池
- 8" 直径防穿刺车轮
- 底板宽度为 24"
- 机器后跟有防滑保护装置
- 起重高度为 40"(101.6 厘米)
- Machine Capacity 1500 lbs. (682 kg.)
STANDARD EQUIPMENT
Model M-1 comes complete with: two strapbars, one 12V sealed long life battery, a battery cover, one two wheel retractable dolly, and one battery charger with auto shut-off and multi voltage feature, and one hook bar leveler.
配件
勾箱、圆筒负载凹面附件、充电线、延伸底板 —— 深度/宽度、滑板、面板、大车轮附件、水平支架、负载增高垫、车轮制动器
装载规格 |
||
|
One person |
两人 |
Above weights are based on qualified operators moving loads that have the weight evenly distributed all along the frame. Refer to the detailed loading specification chart on the back.
Load Area Drawing

装载建议说明
Steps for matching loads to PowerMate models and the number of trained qualified operators required to move the loads.
- Determine the weight of the load to be moved.
- Determine where the weight is concentrated in the load. (i.e. The centre of gravity of the load)
- Using the load area drawing, determine in which area (A-1 - through - C2) the centre of gravity is located.
- Refer to the safe loading recommendation chart to determine
- whether the load can be moved safely on flat surfaces, on stairs, on and off vehicles and on and off loading docks to low bed vehicles.
- 安全搬运货物所需操作人员数量。
安全装载重量建议(以磅为单位)
|
|
Safe Loading Weight Recommendations In Kilograms
|
|